31-8266 CHARLOTTE PIPE Dwv Bend Fitting

Review CHARLOTTE PIPE 1-1/2 Inch Dwv Return Bend Fitting Lot Of

The Charlotte Pipe and Foundry 31-8266 1-1/2 inch DWV (Drain-Waste-Vent) bend fitting is a high-quality plumbing component designed to facilitate smooth water flow in residential and light commercial applications. This bend fitting is engineered to meet the demanding requirements of the plumbing industry, ensuring reliable and efficient performance over an extended period.

The Charlotte Pipe 31-8266 bend fitting is manufactured from a durable cast iron material, known for its superior strength and resistance to corrosion. This makes it an excellent choice for applications where the fitting may be exposed to harsh water conditions or chemical environments. The cast iron construction also provides excellent heat dissipation properties, reducing the risk of thermal expansion and subsequent damage to the pipe system.

The 1-1/2 inch diameter of this bend fitting allows it to be used with standard plumbing pipes and fittings. It is designed to make a 90-degree turn, enabling it to effectively navigate corners and fit into tight spaces within plumbing systems. The DWV (Drain-Waste-Vent) designation signifies that this fitting is suitable for use in drain, waste, and vent systems, ensuring the proper functioning of plumbing fixtures and appliances.

The Charlotte Pipe 31-8266 1-1/2 inch DWV bend fitting features a slip-on design, allowing it to be easily installed and connected to pipes using minimal tools. The slip-on connection also allows for easier maintenance and replacement, as the fitting can be removed and replaced without the need for extensive pipework modifications.

This bend fitting comes with a factory-applied protective coating to help prevent rust and corrosion during storage and transportation. It is important to note that this coating should be removed before installation, as it may interfere with the proper sealing of the fitting to the pipe.

In summary, the Charlotte Pipe and Foundry 31-8266 1-1/2 inch DWV bend fitting is a robust and reliable plumbing component designed to meet the needs of residential and light commercial plumbing systems. Its cast iron construction, 90-degree bend design, and slip-on installation make it a versatile and practical choice for a wide range of plumbing applications.

The Charlotte Pipe 31-8266 1-1/2 inch DWV (Drain-Waste-Vent) bend fitting is a common plumbing component used in residential and commercial applications for making turns in drain, waste, and vent pipes. Here are some pros and cons that may help you make an informed decision about purchasing this particular fitting:

1. Durability: This bend fitting is made of cast iron, which is known for its strength and durability. Cast iron fittings are less prone to leaks and damage compared to their plastic counterparts.

2. Corrosion Resistance: Cast iron is resistant to corrosion, making it an ideal choice for areas with hard water or high mineral content. This can save you money in the long run by reducing the need for frequent replacements.

3. Temperature Resistance: Cast iron fittings can withstand high temperatures, making them suitable for use in applications where hot water is involved, such as in kitchens and bathrooms.

4. Versatility: This fitting can be used for both horizontal and vertical applications, making it a versatile addition to your plumbing supply.

1. Weight: Cast iron fittings are heavier than their plastic counterparts, which can make installation more difficult and labor-intensive.

2. Cost: Cast iron fittings are generally more expensive than plastic fittings due to their durability and corrosion resistance.

3. Size and Space: Cast iron fittings are larger than plastic fittings, which can make them more difficult to install in tight spaces.

In conclusion, the Charlotte Pipe 31-8266 1-1/2 inch DWV bend fitting is a reliable and durable plumbing component that offers corrosion resistance, temperature resistance, and versatility. However, it also comes with some drawbacks, such as its weight, cost, and size. Ultimately, the decision to purchase this fitting depends on your specific plumbing needs, budget, and installation considerations. If you require a high-performance, long-lasting fitting that can withstand heavy use and harsh conditions, then this cast iron bend fitting may be a worthwhile investment. However, if you are working on a budget or have limited space, a plastic fitting may be a more practical option.

Details:

Charlotte Pipe 31-8266 1-1/2 dwv return bend fitting lot of 2.: brand: Charlotte Pipe, manufacturer part #: 31-8266 1-1/2, condition: brand new, unused, and in original packaging. 1-1/2 inlet and outlet diameter, PVC dwv fitting for drain, waste, vent systems, lot of 2 fittings included. Feel free to make an offer.

It is designed for sanitary drain, waste and vent dwv applications secure PVC dwv Pipe connections. This is a new Charlotte Pipe 31-8266 1-1/2 dwv return bend fitting lot of 2.

specifications pipehosefit:

• brand: Charlotte Pipe
• mpn: 31-8266
• part type: Fitting
• unit type: Piece
• country of origin: United States

shipping Pipehosefit:

• class: standard, one-day, expedited
• carrier: ups
• service: ups ground, ups next day air, ups 2nd day air
• transit: 4-11 days
• type: calculated

general pipehosefit:

• category: Business & Industrial > Adapters > Pipe Hose Fittings

payments Pipehosefit:

• other
• wallet: apple-pay
• credit card: visa

offer Pipehosefit:

• availability: in stock
• sold #: 13
• started: may 15, 2026
• options: ship-to-home
• prices: $2.06–$44.16
• item condition:
  • New
  • Open box
  • New – Open box
• best offers: true
• in stock #: 3

seller Pipehosefit:

• rating: 99.8%
• city: fort collins, colorado
• # reviews: 5174

returns Pipehosefit:

• paid by: seller
• policy: returns accepted
• time: 60 days
• method: money back