1. Pipe & Hose Fittings (Hydraulics/Pneumatics) Offered
  2. sku: 6589994748222631
  3. GRINNELL 1-1/2X3/4CITEE-USA

1-1-2X3-4CITEE-USA GRINNELL Cast Iron Tee

1-1-2X3-4CITEE-USA GRINNELL Cast Iron Tee
Product Information
BrandGRINNELL
Manufacturer Part Number1-1/2X3/4CITEE-USA
End C DiameterFOR TEES
End A Diameter1 1/2 IN
MaterialCAST IRON
TypePIPES, VALVES FITTINGS FITTINGS BLACK PIPE FITTINGS
End A-to-end B GenderFEMALE-TO-FEMALE
Fitting TypeTEE
Country/region Of ManufactureUNITED STATES
End A-to-end BNPT-TO-NPT

Review GRINNELL 1-1/2x3/4citee-usa 1-1/2 Inch 3/4 Cast Iron Tee Class 125 Made In Usa

Introducing the Grinnell 1-1/2 x 3/4 CITEE-USA 1-1/2 Cast Iron Tee 125, a high-quality plumbing component designed to provide reliable and durable performance for your water supply system. This tee is part of the Grinnell CITEE-USA line, which is recognized for its adherence to the strictest quality standards and its compatibility with various plumbing codes and applications.

The Grinnell 1-1/2 Cast Iron Tee 125 is a tee fitting that is used to connect two pipes at a right angle. It measures 1-1/2 inches in diameter at the inlet and 3/4 inch in diameter at the outlet. The tee is designed with a 125-degree turn, making it suitable for a wide range of plumbing installations.

This tee is constructed from cast iron, a material known for its exceptional strength, durability, and resistance to corrosion. Cast iron is ideal for use in water supply systems due to its ability to withstand the pressure and temperature variations that can occur over time. The Grinnell 1-1/2 Cast Iron Tee 125 is also coated with a protective enamel finish, which helps to prevent rust and extends the lifespan of the tee.

Installation of the Grinnell 1-1/2 Cast Iron Tee 125 is straightforward and can be completed using standard plumbing tools. The tee is threaded on both ends, allowing it to be easily connected to the pipes using pipe dope and thread sealing tape. The threaded connections are also designed to provide a watertight seal, ensuring that there are no leaks or other issues that could compromise the performance of your plumbing system.

In summary, the Grinnell 1-1/2 x 3/4 CITEE-USA 1-1/2 Cast Iron Tee 125 is a high-quality plumbing component that is ideal for use in water supply systems. It is constructed from cast iron for exceptional strength and durability, and it is coated with a protective enamel finish to prevent rust. The tee is threaded on both ends and can be easily installed using standard plumbing tools. By choosing this tee for your plumbing project, you can be confident that you are investing in a reliable and long-lasting solution.

The Grinnell 1-1/2x3/4 CI Tee 125 is a cast iron tee used in plumbing systems for connecting pipes of different sizes. Here are some pros and cons of buying this tee:

Pros:

1. Durability: Cast iron tees are known for their durability and strength. They can withstand high water pressure and corrosive water without getting damaged easily.

2. Versatility: This tee can be used in various plumbing applications, including water supply lines, drain-waste-vent systems, and radiant heating systems.

3. Leak-proof: The threaded connections on this tee are designed to be leak-proof, ensuring that there are no water leaks in the plumbing system.

4. Easy to install: This tee can be easily installed using standard plumbing tools and does not require any special skills or expertise.

Cons:

1. Weight: Cast iron tees are heavier than other materials such as PVC or CPVC. This can make them more difficult to transport and install, especially in tight spaces.

2. Cost: Cast iron tees are more expensive than other materials due to their durability and strength. This can make them a more costly option for some plumbing projects.

3. Rust: Cast iron tees are prone to rusting if they are not properly coated or if they are exposed to moisture for extended periods of time.

Conclusion:

The Grinnell 1-1/2x3/4 CI Tee 125 is a reliable and durable option for plumbing applications where high water pressure and corrosive water are a concern. Its leak-proof design and versatility make it a popular choice among plumbers. However, its weight and cost may be a drawback for some projects. Ultimately, the decision to buy this tee depends on the specific requirements of the plumbing project and the budget available.

Recommendation:

If you are working on a plumbing project where durability and strength are important, and you have the budget for it, then the Grinnell 1-1/2x3/4 CI Tee 125 is a great option to consider. Its leak-proof design and versatility make it a reliable choice for various plumbing applications. However, if weight and cost are a concern, you may want to consider other materials such as PVC or CPVC.

Details:

1-1/2 x 3/4 npt cast iron class 125 threaded tee, made in usa - 100% domestic fitting, factory new, obtained directly from the manufacturer, Grinnell.

specifications pipehosefit:

  • brand: Grinnell
  • mpn: 1-1/2x3/4citee-usa
  • end c diameter: For Tees
  • end a diameter: 1 1/2 In
  • material: Cast Iron
  • type: Pipes, Valves Fittings Fittings Black Pipe Fittings
  • end a-to-end b gender: Female-to-female
  • fitting type: Tee
  • country/region of manufacture: United States
  • end a-to-end b: Npt-to-npt

offer pipehosefit:

  • price: $16.67
  • item condition: New
  • started: july 26, 2025
  • in stock #: 2
  • availability: in stock
  • sold #: 27
  • options: ship-to-home

shipping pipehosefit:

  • service: economy
  • class: economy
  • type: fixed
  • transit: 4-9 days

seller pipehosefit:

  • rating: 100.0%
  • # reviews: 1014
  • city: elmwood park, new jersey

general pipehosefit:

  • category: Business & Industrial > Adapters > Pipe Hose > Threaded Fittings

payments pipehosefit:

  • credit card: diners-club
  • wallet: paypal
  • other

returns pipehosefit:

  • policy: no returns
rating: 100.0% out of 100 based on 14 user ratings.
Similar Items:
pipehosefit logo
2 offers $16.67–$16.67 USD
  • New. USA Seller
  • New. USA Seller
© pipehosefit.com