0310500806 ANVIL Npt Elbow Malleable Iron Wsp Wog Fitting

Review ANVIL Pc 3/4 Inch Npt Elbow Malleable Iron 300 Wsp Wog Fitting

The Anvil 0310500806 3/4 NPT 90 degree elbow is a malleable iron fitting designed for use in piping systems. This elbow is specifically engineered with a 3/4 inch Nominal Pipe Thread (NPT) connection size and a 90 degree bend angle, making it suitable for various piping applications where a change in direction is required.

This Anvil elbow is fabricated from malleable iron, which is known for its superior strength, toughness, and ductility. The malleable iron material is heat-treated to ensure a high yield strength of 300,000 psi (2,068,962 kPa) and a ultimate tensile strength of 200,000 psi (1,378,987 kPa). These mechanical properties make the fitting robust enough to withstand the pressure and stresses encountered in industrial piping systems.

Additionally, this Anvil 0310500806 elbow features a 2000 pound working pressure (wog), enabling it to handle a substantial flow rate while maintaining optimal performance. The 3/4 inch NPT connection size is a common standard in various industries, including oil and gas, water treatment, and HVAC, making this elbow a versatile addition to any piping system.

This Anvil malleable iron elbow is designed and manufactured under stringent quality control procedures to ensure consistent dimensions, smooth threads, and a leak-free connection when mated with corresponding fittings. The fitting's surface is treated with a protective coating for enhanced corrosion resistance, ensuring long-lasting performance in harsh environments.

To ensure ease of installation, the Anvil 0310500806 3/4 NPT 90 degree elbow is engineered with uniform threads and a well-defined OD and ID, allowing for precise alignment and thread engagement. Overall, this Anvil malleable iron elbow is a reliable and robust solution for piping systems requiring a 90 degree bend with a 3/4 inch NPT connection size and a 2000 pound working pressure.

Pros and Cons of Buying Anvil 0310500806 3/4 NPT 90 Degree Elbow Fitting

The Anvil 0310500806 3/4 NPT 90 Degree Elbow Fitting is a malleable iron fitting used in plumbing and piping applications. This fitting is designed for 3/4 inch NPT (National Pipe Thread) pipes and has a 90-degree bend with a working pressure rating of 300 psi (pounds per square inch) and a weight rating of 2000 lbs (pounds). In this article, we will discuss the pros and cons of purchasing this fitting.

1. Durability: The Anvil 0310500806 3/4 NPT 90 Degree Elbow Fitting is made of malleable iron, which is a strong and rigid material. It is resistant to corrosion and can withstand high pressure and temperature conditions, making it suitable for various industrial and commercial applications.

2. Versatility: This fitting can be used in a wide range of applications, including water, steam, and oil systems. Its 3/4 inch NPT thread size is a common size used in residential and commercial plumbing installations.

3. Easy to Install: The 90-degree bend of this fitting allows for easy installation in tight spaces, making it an excellent choice for applications where space is limited.

4. Cost-Effective: Compared to other materials like copper or stainless steel, malleable iron is a more cost-effective option for piping and plumbing applications.

1. Weight: The Anvil 0310500806 3/4 NPT 90 Degree Elbow Fitting is relatively heavy compared to other materials, which can make it more difficult to handle and install, especially in hard-to-reach areas.

2. Rough Threads: The NPT threads on this fitting are rough, which can result in leaks if not properly sealed with thread sealant and tightened properly.

3. Limited Temperature Range: The 300 psi working pressure rating of this fitting limits its use in high-temperature applications. For applications requiring higher temperature ratings, stainless steel or other materials with higher temperature ratings may be needed.

The Anvil 0310500806 3/4 NPT 90 Degree Elbow Fitting is a durable and cost-effective option for various plumbing and piping applications. Its durability and versatility make it an excellent choice for industrial and commercial applications, while its size and shape make it suitable for tight spaces. However, its weight, rough threads, and limited temperature range are drawbacks that should be considered before making a purchase. Ultimately, the decision to buy this fitting depends on the specific requirements of your application.

If you are looking for a durable, cost-effective, and versatile fitting for your plumbing or piping application, the Anvil 0310500806 3/4 NPT 90 Degree Elbow Fitting is an excellent choice. However, if you require a fitting with a higher temperature rating or one that is easier to handle, you may want to consider other options. Be sure to carefully review the specifications and requirements of your application before making a purchase.

Details:

Made from robust malleable iron, this fitting is engineered to deliver consistent performance and rated for 300 wsp 2000 wog, ensuring a strong corrosion-resistant connection.the features female-to-female configuration with 3/4-inch diameters on both ends, facilitating smooth secure union. 4 pieces Anvil 3/4 npt 90 elbow, part number.

specifications pipehosefit:

• brand: Anvil
• mpn: 0310500806
• part type: Elbow Fitting
• end b diameter: 3/4 In
• end a-to-end b gender: Female-to-female
• material: Malleable Iron
• fitting type: Elbow
• country/region of manufacture: United States
• end a-to-end b: Npt-to-npt

returns pipehosefit:

• time: 14 days
• paid by: buyer
• policy: returns accepted
• method: money back

payments pipehosefit:

• other
• wallet: paypal
• credit card: visa

shipping pipehosefit:

• class: standard
• transit: 5-10 days
• type: fixed
• service: usps ground advantage
• carrier: usps

offer pipehosefit:

• prices: $10.00–$40.00
• item condition:
  • New – Open box
  • New
• options: ship-to-home
• in stock #: 2
• sold #: 25
• availability: in stock
• started: february 19, 2025
• best offers: true

seller pipehosefit:

• rating: 100.0%
• city: ava, missouri
• # reviews: 1282

general pipehosefit:

• category: Business & Industrial > Adapters > Pipe Hose > Threaded Fittings