02899 CHARLOTTE PIPE Hub Deg Abs Elbow Bend

Review CHARLOTTE PIPE 1-1/2 Inch Hub 22-1/2 Deg Abs Elbow 1/16 Bend Lot Of 50

The Charlotte Pipe and Foundry 02899 1-1/2 Hub 22-1/2 Degree Abs Elbow 1/16 Bend 50 is a crucial plumbing component designed for use in Abs (Absolute Pressure) applications. This elbow is made from high-quality ductile iron cast material, ensuring durability and strength.

The 1-1/2 hub of this elbow is designed to connect to pipes or fittings of the same size, providing a secure and leak-free connection. The elbow itself has an inlet angle of 22-1/2 degrees, making it ideal for use in situations where a slight change in direction is required. The 1/16 bend, also known as the radius, is measured as the degree of curvature in the elbow. In this case, it is a 50 degree radius bend, which allows for a smooth flow of fluid without causing excessive turbulence.

This Abs elbow is specifically designed for use in high-pressure applications, making it an essential component for industrial and commercial plumbing systems. Its Abs rating means that it can handle working pressures up to 15 psi (pounds per square inch) above the maximum working pressure of the piping system.

The Charlotte Pipe and Foundry 02899 1-1/2 Hub 22-1/2 Degree Abs Elbow 1/16 Bend 50 is manufactured in accordance with ASME B16.11 (ANSI/ASME A115.11) specifications, ensuring that it meets the highest standards of quality and safety. It is also coated with a protective zinc-rich primer and finished with a red oxide coating, which provides corrosion resistance and helps to maintain the longevity of the fitting.

In summary, the Charlotte Pipe and Foundry 02899 1-1/2 Hub 22-1/2 Degree Abs Elbow 1/16 Bend 50 is a robust and reliable plumbing component, engineered for use in high-pressure Abs applications. Its durable ductile iron cast construction, secure hub connection, smooth-flowing 50 degree radius bend, and protective coating make it a valuable addition to any plumbing system.

Charlotte Pipe and Foundry's 02899 1-1/2 hub 22-1/2 degree Abs elbow 1/16 bend 50 is a type of pipe fitting used in plumbing and other applications where Abs (Acrylonitrile Butadiene Styrene) pipes are used. Here are some pros and cons of buying this specific pipe fitting:

1. High-quality material: Charlotte Pipe and Foundry is known for producing high-quality pipe fittings made from durable materials. This Abs elbow is no exception as it is made from ABS material.

2. Leak-free connection: This Abs elbow comes with a hub design, which provides a leak-free connection between pipes. The 1-1/2 inch hub size is suitable for standard plumbing applications.

3. Wide range of uses: Abs pipe and fittings are suitable for use in various applications such as drain, waste, and vent systems, as well as natural gas and water distribution systems.

4. Easy installation: Abs pipe and fittings are relatively easy to install as they do not require soldering or brazing.

1. Limited temperature range: Abs pipe and fittings are not suitable for use in applications where high temperatures are involved. The maximum recommended temperature for Abs pipe is 140 degrees Fahrenheit.

2. Not suitable for high-pressure applications: Abs pipe and fittings are not suitable for use in high-pressure applications as they can burst at high pressures.

3. Not suitable for outdoor use: Abs pipe and fittings should not be used for outdoor applications as they are not resistant to UV radiation and can degrade over time.

Charlotte Pipe and Foundry's 02899 1-1/2 hub 22-1/2 degree Abs elbow 1/16 bend 50 is a high-quality pipe fitting suitable for various plumbing applications where Abs pipes are used. Its hub design provides a leak-free connection, and it is relatively easy to install. However, it has some limitations, such as a limited temperature range, not suitable for high-pressure applications, and not suitable for outdoor use. Therefore, it is essential to ensure that this Abs elbow is used in applications where it is suitable to avoid any potential issues.

If you are looking for a high-quality Abs elbow for plumbing applications, Charlotte Pipe and Foundry's 02899 1-1/2 hub 22-1/2 degree Abs elbow 1/16 bend 50 is an excellent choice. However, it is crucial to ensure that it is used in applications where it is suitable to avoid any potential issues. Additionally, consider checking the temperature and pressure requirements of your application to ensure that this Abs elbow meets your needs.

Details:

This very often causes a delay in the first scan. Please understand this is out of our control. USPS will then deliver the item. 50 1/16 bend hub x 1-1/2 black hard plastic connecting Pipe.

On rare occasion, USPS or FedEx may delay a package. USPS ground and priority.

specifications pipehosefit:

• brand: Charlotte Pipe
• mpn: 02899
• part type: Hub Elbow

seller Pipehosefit:

• rating: 99.1%
• city: kansas city, missouri
• # reviews: 17580

returns Pipehosefit:

• time: 30 days
• policy: returns accepted
• paid by: seller
• method: money back

general pipehosefit:

• category: Business & Industrial > Adapters > Pipe Hose Fittings

offer Pipehosefit:

• options: ship-to-home
• sold #: 15
• availability: in stock
• prices: $19.99–$100.58
• item condition:
  • New
  • New – Open box
• in stock #: 2
• started: july 10, 2025

shipping Pipehosefit:

• class: standard
• service: usps ground advantage
• transit: 4-9 days
• carrier: usps
• type: fixed

payments Pipehosefit:

• wallet: paypal
• other
• credit card: mastercard